Thursday, December 20, 2012

Step by step - candle pots

As I mentioned in previous posts gel LP and MP require utensils. Containers must be safety . They can be made of glass, metal, ceramic, and can also make the dish with paraffin. Flammable materials are not allowed - wood, plastic or cardboard.
Candle Gel nicest presented in glass, the decorations showing any gel or colors. Metal or ceramic containers may have various interesting forms, we can decorate them in different ways and then this candle is also very attractive.


Glass containers:


Metal containers :


 When you choose a container, you must also remember that there may be too narrow, sharply tapered (eg, a glass of champagne), or at some point to expand rapidly. If you choose container like this,you  must first to fill with decorative sand for example, then mounted in the sand candlewick, otherwise the candle light off.

Example:


Step by step - candlewick

To light a candle we need a candlewick. For gel candles are special wicks with paper core or zinc. If you buy primed wick (paraffin), before you put it in the jar with gel wax you must remove paraffin gel - otherwise, paraffin and gel begins to melt and our gel will become cloudy and unattractive. Another problem for wicks primed this time is the fact that it is trapped between the fibers a lot of air, it makes  a  lot of unnecessary bubbles around the wick.

The best way to remove the wax or the air from the fiber wick is boiling it in a small amount of gel. Just heat the gel to about 105 degrees C and put the wick, wait for the wax started to melt or air bubbles escape. Candlewick prepared in this way is ready to use.

 Before you attach the wick in the pot we also know that wicks have different thicknesses. That's what we'll use the wick thickness depends on the diameter of the pot  our candle. The larger the diameter the thicker candlewick.

At last use the  T-shaped
metal tab to candlewick and put it to your candle pot .


 

Step by step - gel

To make a gel candle we need  enough creativity, patience and a few tips. On my blog I will try to describe how to make candles, give a few tips. But remember - first of all making candles can make pleasure and fun.

I'll start with the gel - without it, there is no topic :)

There are three basic types of gel depending on its density.

- LP - a gel with the lowest density.After cool has  minimum of air bubbles, however, takes the least flavor and is not good for transport It is too watery to keep the well walls of the jar.

- MP - a gel with the medium density, the most universal. Nicely to scent, it is good to transport. However, after cool, creates a lot of the air bubbles (which can be partially removed  
-about it ,another time)
- HP - the densest, does not require any jar. Quickly freezes, unfortunately creates a lot of air bubbles.

Gel wax we melt like a  paraffin. Its melting point is higher, however - for example, allowing us to place the paraffin ornaments in  gel wax.

The gel can be transparent (
It can be dyed to different colors by dyes):



 As well as color :

   

Wednesday, December 19, 2012

Gel Candles - what's all about ?

Welcome everyone to my blog.

I create gel candles, which until recently were available in some stores with decorations and suddenly disappeared .

In the first post, I'll try to write  a little bit about the same candle.

Candle gel  (wax gel ) looks like jelly. Has the same consistency. Wax is   transparent  and beautifully refracted light. When you light a  candle ,it looks like lightened snow ball.  

To create gel candles you need except dishes and wax gel only your creative ideas ! 

Below  picture of one of my  gel candle .